3/4/5/6mm Spacing Punch Tool For Leather Hole Punches Tool Lacing Stitching Sewing DIY Leather Craft Tools 1/2/4/6Prong
Material: white steel (high speed steel) Color: as shown Total length: about 9.7cm/3.81inch Tooth spacing: 3/4/5/6mm Tooth width: 2.0mm
1 tooth diamond cutter is mainly used for right angle turn or only need to make a hole separately. 2 teeth diamond cutter is usually used to make two holes in the curve corner, or to play a smaller leather. 4 teeth for straight lines, wide range of uses. 6 teeth are used when playing a long straight line, you can play 6 holes at one time, the efficiency is high.
1. When punching, the diamond cutter must be perpendicular to the leather surface to prevent the tooth decay from being interrupted by the tilt of the diamond cutter! 2. Pay attention to the strength when hammering the diamond, first light and then heavy, feel the effect. 3. When punching the leather, use it with the pad, and put the magazine on the pad to protect the teeth of the cutter and pads. 4. When the diamond cutter is not in use, you can wipe the oil on the teeth, or the salad oil for protection and maintenance!
The size is manually measured and may have an error of 1-3 mm, which is normal. Due to differences between the different displays, the image may not reflect the actual color of the project. Thank you! List: 1 punching tool / 4 punching tools